SFIC CORES & KEYS

VIEW PRINTABLE ASSEMBLY INSTRUCTIONS.pdf

Cores Info

Made in USA

FEATURES:
  • 626/26D Brushed Satin Chrome Finish Standard
  • Available in A2 and A4 system.
  • Stamping on core face or side
  • Keyed Alike – or – Keyed Different
  • Key Configurations: Master, Grand Master and Great Grand Master
  • Key systems built and maintained by Delta Lock
  • Other finishes available “Minimum quantities apply
Base Part # XI CORE 7 X BC UNCO When ordering replace X with your choice of available keyways in RED under Key Info

Key Info

Available in Keyway

A, B, C, D, DD, E, F, G, H, J, K, L, M, Q, R, 1C, 1D, DL10


Accessories

GREEN ACTUATOR KEY Authorized Tool

Core Installation

To Correctly insert the Interchangeable Core into the lock housing:

check if prongs are horizontal Check if the prongs inside the housing are in the horizontal position. If they are not,

insert green actuator to position prongs horizontally insert the Green Actuator to orient them the horizontal position.

prongs should be in horizontal position now After they are aligned,

insert core into housing and lock core in place Insert the core into the housing and turn the control key to the locked position

Do Not use an unauthorized tool (screwdriver, pliers, etc.)

Core Installation

To Correctly insert the Interchangeable Core into the lock housing:

  1. Check if the prongs inside the housing are in the horizontal position.
  2. If they are not, insert the Green Actuator to orient them the horizontal position.
  3. After they are aligned,
  4. Insert the core into the housing and turn the control key to the locked position
  5. Do Not use an unauthorized tool (screwdriver, pliers, etc.)
IC-core-installation-steps-master-GOP

366 Central Avenue, Bohemia NY 11716 * 631-238-7035 * customerservice@deltalock.biz